$165.00 (inc GST)
The Daikin WiFi Controller BRP072A42 enables you to control your Daikin split system air conditioner from anywhere you have an internet connection.
*PLEASE* make sure you tell us in the Order Notes during checkout what system this Daikin WiFi controller is for. This is important as there is an extra cable required (FOC) for 2.0kW – 7.1kW Cora systems.
Installation is best suited to those technically proficient with computer systems or tradesmen. Make sure the power is off at the isolator to the condensing unit or at the switchboard. Remove the front cover of the split system and then the cover of the indoor PCB. Attach the cable from the BRP072A42 WiFi controller to the port marked S21 on the indoor PCB. Replace the PCB cover and the front cover. Using the supplied two sided sticky tape attach the BRP072A42 to the wall next to the air conditioner. The system is easily configured using either DHCP or fixed IP addresses. Please see the guides below for further information. Full support is available should you encounter any difficulties.
Daikin warrant this product to work with their latest split systems, the new P series. However it should work perfectly with any Daikin split system that has an S21 port on the indoor PCB. This is almost all systems manufactured in the last 8 years. Please check your PCB before ordering, or better still call or email us. We offer a full, no quibble, refund to anyone that purchases this controller and is unable to get it to work with their system.
Apps for iOS and Android are available for free from their respective app stores.
This video is actually from Daikin Europe but it is essentially the same product as you’ll see.
*PLEASE* make sure you tell us in the Order Notes during checkout what system this controller is for. This is important as there is an extra cable required (FOC) for 2.0kW – 7.1kW Cora systems.